![]() |
Brand Name: | WINLEY |
Model Number: | S-3000/25 |
MOQ: | 1unit |
Price: | $5000-$150000 |
Packaging Details: | Plywood case |
Payment Terms: | T/T |
3 Mva 3 Phase Pad Mount Three-Phase Oil-Immersed Distribution Transformer 25KV
summary
WINLEY offers a complete line of liquid-filled ThreePhase Pad-Mounted distribution transformers that meet applicable ANSI®/IEEE® standards.With high voltages up to 34.5 kV and ratings up to 5,000kVA , compartmental-type Three Phase Pad-Mounted Commercial Transformers are designed for outdoor installation on a concrete pad and provide underground power distribution to commercial, ndustrial and institutional loads.
Main data
Transformer Type | Pad Mounted, Compartmental-Type |
Transformer Feed Type | Loop Feed |
Phase | Three Phase |
Capacity | 3 MVA (3000 KVA) |
Vector Group | DYN1 |
Primary Voltage | 20780V |
Secondary Voltage | 480Y/277 |
Frequency | 60 Hz |
Temperature Rise | 65°C |
Insulation Rating | Class E Insulation - 120°C, 248°F |
Cooling Class | KNAN; Self-Cooled |
Forced Air (Fans) | None |
Impedance (Typical) | 5.0-7.5% Typical |
Winding Material | Copper |
Ambient Temperature Rating | 40°C |
Ambient Operating Temperature Range | -40°C to +40°C (-50°F to +104°F) |
Sound Level | 58 dBA |
Dimensions* | 90''-W x 80''-D x 83''-H |
Total Weight (Liquid Filled)* | 12,576 Lbs |
Standard Features
• 60 Hz operation.
• 65°C average winding rise.
• Radial & loop feed arrangements.
• Dead and live front type of HV terminals.
• HV BIL 45 – 150 kV (Dead Front) 200 kV (Live Front).
• LV BIL 30 – 60 kV.
• Three-point latching of low-voltage door.
• High-voltage door, which can be opened only after
the low-voltage door is opened.
• Rigid steel partition.
• Transformer tank welded from cover to base.
• Permanent nameplate.
• One-inch NPT pipe cap filling provision.
• ANSI tank ground pads.
• One-inch drain valve and sampler.
• Automatic pressure-relief valve (35 SCFM).
• Tap changer with (2) 2.5% full capacity taps above
and below nominal.
• One 10”x18” (or 14”x25”) hand hole in transformer
tank cover.
• Painted olive-green color (Munsell 7GY 3.29/1.5).
• Designed, manufactured and tested in accordance
with the latest ANSI standards
Technical drawings
Specification
Rated Capacity | Loss(w) | Dimension(mm) | Weight(kg) | ||||
No-load Loss(W) | On-load Loss | W | D | H | Oil Weight (L) | Total Weight (KG) | |
45kVA | 160 | 1000 | 1730 | 990 | 1270 | 416 | 950 |
75kVA | 180 | 1250 | 1730 | 990 | 1270 | 435 | 1020 |
150kVA | 280 | 2200 | 1730 | 1245 | 1270 | 473 | 1225 |
300kVA | 480 | 3650 | 1830 | 1295 | 1270 | 605 | 1655 |
500kVA | 680 | 5100 | 2260 | 1345 | 1270 | 720 | 2110 |
750kVA | 980 | 7500 | 2260 | 1448 | 1628 | 1022 | 2950 |
1000kVA | 1150 | 10300 | 2260 | 1500 | 1625 | 1325 | 3720 |
1500kVA | 1640 | 14500 | 2210 | 1470 | 2150 | 1552 | 4672 |
2000kVA | 2160 | 20645 | 2380 | 1600 | 2220 | 1855 | 5670 |
2500kVA | 2680 | 27786 | 3070 | 1650 | 2330 | 2006 | 6580 |
3000kVA | 3300 | 30300 | 3260 | 1850 | 2460 | 2336 | 7500 |
3750kVA | 4125 | 37875 | 4080 | 2060 | 2680 | 2650 | 8450 |
Production process
FAQ
1. Q: Can I have a sample order?
A: Yes, we welcome sample order to test and check quality.
2. Q: What is the lead time?
A: Mass production time 15-25 days.
3. Q: How long is the warranty?
A: 24 monthes from B/L. If there are any accessory problems,just provide the photos of damaged accessory,then we will provide free service. According to the number of products,we will provide easily damaged accessories for free. we also can provide technical support if you need.
4. Q: Is OEM/ODM available?
A: Yes,it is! We are manufacturer with our own R&D team, we can customize products according to customer's drawing or requirements.
Customized services:
a. Customized color and special function.
b. Customized box.
c. Print customer's logo.
d. Your other ideas about product, we can help you design and put them into production. The above customized services must be confirmed before production.
5. Q: How to control the products quality?
A: Our company owns the core technology ,all kinds of products hold CE certificate. We have professional engineers. Workers are strictly required to make products according to the drawings. Each process has technical instructors.The QC supervisors will regularly inspect the production. We will do products performance tests during production, and comprehensive quality tests when the products is completed.
![]() |
Brand Name: | WINLEY |
Model Number: | S-3000/25 |
MOQ: | 1unit |
Price: | $5000-$150000 |
Packaging Details: | Plywood case |
Payment Terms: | T/T |
3 Mva 3 Phase Pad Mount Three-Phase Oil-Immersed Distribution Transformer 25KV
summary
WINLEY offers a complete line of liquid-filled ThreePhase Pad-Mounted distribution transformers that meet applicable ANSI®/IEEE® standards.With high voltages up to 34.5 kV and ratings up to 5,000kVA , compartmental-type Three Phase Pad-Mounted Commercial Transformers are designed for outdoor installation on a concrete pad and provide underground power distribution to commercial, ndustrial and institutional loads.
Main data
Transformer Type | Pad Mounted, Compartmental-Type |
Transformer Feed Type | Loop Feed |
Phase | Three Phase |
Capacity | 3 MVA (3000 KVA) |
Vector Group | DYN1 |
Primary Voltage | 20780V |
Secondary Voltage | 480Y/277 |
Frequency | 60 Hz |
Temperature Rise | 65°C |
Insulation Rating | Class E Insulation - 120°C, 248°F |
Cooling Class | KNAN; Self-Cooled |
Forced Air (Fans) | None |
Impedance (Typical) | 5.0-7.5% Typical |
Winding Material | Copper |
Ambient Temperature Rating | 40°C |
Ambient Operating Temperature Range | -40°C to +40°C (-50°F to +104°F) |
Sound Level | 58 dBA |
Dimensions* | 90''-W x 80''-D x 83''-H |
Total Weight (Liquid Filled)* | 12,576 Lbs |
Standard Features
• 60 Hz operation.
• 65°C average winding rise.
• Radial & loop feed arrangements.
• Dead and live front type of HV terminals.
• HV BIL 45 – 150 kV (Dead Front) 200 kV (Live Front).
• LV BIL 30 – 60 kV.
• Three-point latching of low-voltage door.
• High-voltage door, which can be opened only after
the low-voltage door is opened.
• Rigid steel partition.
• Transformer tank welded from cover to base.
• Permanent nameplate.
• One-inch NPT pipe cap filling provision.
• ANSI tank ground pads.
• One-inch drain valve and sampler.
• Automatic pressure-relief valve (35 SCFM).
• Tap changer with (2) 2.5% full capacity taps above
and below nominal.
• One 10”x18” (or 14”x25”) hand hole in transformer
tank cover.
• Painted olive-green color (Munsell 7GY 3.29/1.5).
• Designed, manufactured and tested in accordance
with the latest ANSI standards
Technical drawings
Specification
Rated Capacity | Loss(w) | Dimension(mm) | Weight(kg) | ||||
No-load Loss(W) | On-load Loss | W | D | H | Oil Weight (L) | Total Weight (KG) | |
45kVA | 160 | 1000 | 1730 | 990 | 1270 | 416 | 950 |
75kVA | 180 | 1250 | 1730 | 990 | 1270 | 435 | 1020 |
150kVA | 280 | 2200 | 1730 | 1245 | 1270 | 473 | 1225 |
300kVA | 480 | 3650 | 1830 | 1295 | 1270 | 605 | 1655 |
500kVA | 680 | 5100 | 2260 | 1345 | 1270 | 720 | 2110 |
750kVA | 980 | 7500 | 2260 | 1448 | 1628 | 1022 | 2950 |
1000kVA | 1150 | 10300 | 2260 | 1500 | 1625 | 1325 | 3720 |
1500kVA | 1640 | 14500 | 2210 | 1470 | 2150 | 1552 | 4672 |
2000kVA | 2160 | 20645 | 2380 | 1600 | 2220 | 1855 | 5670 |
2500kVA | 2680 | 27786 | 3070 | 1650 | 2330 | 2006 | 6580 |
3000kVA | 3300 | 30300 | 3260 | 1850 | 2460 | 2336 | 7500 |
3750kVA | 4125 | 37875 | 4080 | 2060 | 2680 | 2650 | 8450 |
Production process
FAQ
1. Q: Can I have a sample order?
A: Yes, we welcome sample order to test and check quality.
2. Q: What is the lead time?
A: Mass production time 15-25 days.
3. Q: How long is the warranty?
A: 24 monthes from B/L. If there are any accessory problems,just provide the photos of damaged accessory,then we will provide free service. According to the number of products,we will provide easily damaged accessories for free. we also can provide technical support if you need.
4. Q: Is OEM/ODM available?
A: Yes,it is! We are manufacturer with our own R&D team, we can customize products according to customer's drawing or requirements.
Customized services:
a. Customized color and special function.
b. Customized box.
c. Print customer's logo.
d. Your other ideas about product, we can help you design and put them into production. The above customized services must be confirmed before production.
5. Q: How to control the products quality?
A: Our company owns the core technology ,all kinds of products hold CE certificate. We have professional engineers. Workers are strictly required to make products according to the drawings. Each process has technical instructors.The QC supervisors will regularly inspect the production. We will do products performance tests during production, and comprehensive quality tests when the products is completed.